NEW Hyundai i30 Hatch Wagon Power Window Regulator 07-12 Right Front RHS FD

Calculate Shipping

Free Shipping - $0.00

Hyundai i30 FD Series 11/2007 - 4/2012 Right hand (drivers side) front window regulator assembly

Compatible with hatchback & wagon models built between specified dates

Brand new quality aftermarket replacement, Supplied as pictured with new bolts for fitting your existing motor

This is for the window regulator ONLY which unbolts from the door panel assembly , Does not included power window motor or Door panel as pictured, This is the replacement for the window regulator only. You will need to re-use your existing motor & door panel if they are in good working order.

To suit models only built between specified dates above, please check yours before purchasing, If you are unsure about this suiting your vehicle please contact one of our sales staff for assistance.

SKU	W0-HNIA.1680.AR
Compatible Makes	Hyundai
Product	Window Regulator
Product	Window Regulator
Shipping Weight	1.5000kg
Shipping Width	0.500m
Shipping Height	0.200m
Shipping Length	0.200m
Shipping Cubic	0.020000000m3

Hyundai Power Window Regulator
By: Heather McLeod-Dryden on 3 December 2018
Better than the original Regulator. This one looks like it will last. The guys at Panelhouse were very helpful and knowledgeable.

(5)

Hyundai i30 Hatch Wagon Power Window Regulator
By: Heather on 16 November 2018
Worked perfectly, good quality (better than original) and the guys at Panelhouse were very helpful. Would not hesitate to buy from them again.

(5)

Save yourself some money!!
By: Paula Goncalves on 7 June 2018
I contacted my local dealer for the regulator and window mechanism for my Hyundai and was told $300 and approximately 3 weeks waiting for it to arrive to them, ordered from Panelhouse online, and a week and $98 later my window was up and running again, excellent service, excellent product and highly recommended, I shall definitely order from here again should the need arise, thankyou

(5)

good quality & great value
7 February 2018
Easy fit up with average tool kit, regardless of the fact that no instructions supplied. here is a few fitment tips; 1, remove door trim. 2, leave std alloy panel on door. 3, drill the 4 x OE mounting rivets heads out with a 4mm pilot drill before drilling out with 8.5-10mm drill bit. 4, loosen the three screws in door lock mechanism. 5, disconnect all wiring loom connections from door panel. 6, lower window to expose window regulator clamps & undo the two bolts. 7, remove internal door lock handle. 8, remove alloy door panel. panel needs to be moved in a downward motion towards front of car to clear regulator and locator bracket (that hooks into door lock mechanism). other than that this is a fairly straight forward fitment. :). I can recommend as its not difficult to fit and is much cheaper than the Hyundai OE regulator kit. i will admit that the window doesn't seem to move as freely as the OE reg but its does the job & the unit look pretty robust.

(5)